Basic Info.
Digital LCD Module Type
Touchscreen
Customized
Non-Customized
Product Description
Product Description
Description
4.0-inch color screen,support 65K color display,display rich colors
480X320 resolution, optional touch function
Using the SPI serial bus, it only takes a few IOs to illuminate the display
Easy to expand the experiment with SD card slot
Provide a rich sample program
Military-grade process standards, long-term stable work
Provide underlying driver technical support ParametersName | Parameter |
Display Color | RGB 65K color |
Screen Size | 4.0(inch) |
Screen Type | TFT |
Driver IC | ST7796S |
Resolution | 480*320 (Pixel) |
Module Interface | 4-wire SPI interface |
Active Area (AA area) | 55.68x83.52 (mm) |
Module PCB Size | 61.74x108.04(mm) |
Touch Screen Type | resistive touch screen |
Touch IC | XPT2046 |
VCC power voltage | 3.3V~5V |
Power Consumption | TBD |
Rough Weight(Package containing) | with touch: 71g |
without touch: 58g |
Number | Pin Label | Description |
1 | VCC | 5V/3.3V power input |
2 | GND | Ground |
3 | CS | LCD chip select signal, low level enable |
4 | RESET | LCD reset signal, low level reset |
5 | DC/RS | LCD command / data selection signal, |
high level: command, low level: data |
6 | SDI(MOSI) | LCD SPI bus write data signal |
7 | SCK | LCD SPI bus clock signal |
8 | LED | Backlight control, high level lighting, |
if not controlled, connect 3.3V always bright |
9 | SDO(MISO) | SPI bus read data signal, if you do not need to the read function, you can not connect it |
(The following is the touch screen signal line wiring, if you do not need to touch function or the module itself does not have touch function, you can not connect them) |
10 | T_CLK | Touch SPI bus clock signal |
11 | T_CS | Touch screen chip select signal, low level enable |
12 | T_DIN | Touch SPI bus input |
13 | T_DO | Touch SPI bus output |
14 | T_IRQ | Touch screen interrupt signal, low level when touch is detected |
Company Profile
Shenzhen Foing Industrial CO., Ltd.,established in 2019,is an young and dynamic enterprise with the integration of designing,manufacturing,selling of circuit board.We are committed to bringing the magic electronic world into everyone, every school, and every institution,to build an intelligent world of scientific innovation. And we insist to keep good quality and service as always.Welcome to work hard with us and develop further.
Our Advantages
1. We will ship the order after comfirming buyer's payment.
2. We can ship to you by UPS/DHL/TNT/FedEx. Pls contact us directly and we will use your preferred ways.
3. We provide 90 days warranty after goods have been received. Our products will be 100% tested before they are shipped out.
4. Any returned must be in their original condition to qualify for a refund or replacement.
Address:
1st Floor, Unit A, Shanling Digital Building, No. 10 Chiwan 1st Road, Shenzhen, Guangdong, China
Business Type:
Manufacturer/Factory
Business Range:
Consumer Electronics, Electrical & Electronics, Industrial Equipment & Components
Management System Certification:
ISO 9001
Company Introduction:
We are a high-tech company that develop and produce electronic module such as Arduino and other module. We insist to keep a good quality and service since 2014. Welcome to work hard with us to develop further.