Basic Info.
Specification
77.6*46.5*15mm
Product Description
Product Description
Introduction:
This power supply is a high-efficiency regulated power supply module. When the input voltage is lower/higher than, or equal to the output voltage, the output voltage can remain stable. For example, if the output is set to 12V, when the input voltage changes between 5 and 32V, the output voltage will remain unchanged at 12V. This module has complete protection functions and can be widely used in notebook power supplies, car power supplies, solar charging, etc.
Festures:
The circuit board adopts 1.6 thick gold plating process;
The input adopts a replaceable fuse to protect the power supply and equipment;
The full-page electrolysis adopts imported original patch, low resistance, high frequency capacitors, which reduces the ripple to the freezing point;
IC adopts Linear imported original;
Constant voltage, constant current, under voltage protection (MPPT is more suitable for solar charging)
Output error indicator, it lights up when the output voltage drifts too seriously, short circuit and other faults;
The back aluminum plate is fixed on the bottom surface of the module with a thermally conductive silicone sheet. You only need to fix the power supply to the chassis with four screws, which can ensure good heat dissipation, without considering insulation and heat dissipation issues;
The inductance is made of sendust, 0.8 double wires are wound in parallel, and the heat is smaller;Electrical parameters:Input voltage | DC5-32V |
Output voltage | DC1V-30V continuously adjustable |
Output current | 10A(Max),within 7A long term |
Output power | 130W(Peak), long-term 80W, please strengthen heat dissipation if it exceeds 80W |
Output ripple | 50mV (12V to 12V, 5A measured) |
Input reverse connection protection | No, if necessary, please connect a diode in series at the output |
Output backflow prevention | No, if you need to charge, please connect a diode in series at the output |
Short circuit protection | Yes |
Company Profile
Shenzhen Foing Industrial CO., Ltd.,established in 2019,is an young and dynamic enterprise with the integration of designing,manufacturing,selling of circuit board.We are committed to bringing the magic electronic world into everyone, every school, and every institution,to build an intelligent world of scientific innovation. And we insist to keep good quality and service as always.Welcome to work hard with us and develop further.
Our Advantages
1. We will ship the order after comfirming buyer's payment.
2. We can ship to you by UPS/DHL/TNT/FedEx. Pls contact us directly and we will use your preferred ways.
3. We provide 90 days warranty after goods have been received. Our products will be 100% tested before they are shipped out.
4. Any returned must be in their original condition to qualify for a refund or replacement.
Address:
1st Floor, Unit A, Shanling Digital Building, No. 10 Chiwan 1st Road, Shenzhen, Guangdong, China
Business Type:
Manufacturer/Factory
Business Range:
Consumer Electronics, Electrical & Electronics, Industrial Equipment & Components
Management System Certification:
ISO 9001
Company Introduction:
We are a high-tech company that develop and produce electronic module such as Arduino and other module. We insist to keep a good quality and service since 2014. Welcome to work hard with us to develop further.