Basic Info.
Product Description
Product Description
Introduction
The NanoPi NEO Air is a 40 x 40mm open source ARM board for makers.It uses an Allwinner H3 Quad Core A7 processor at 1.2GHz.Its pins are compatible with the NanoPi NEO(V 1.2) and its 24-pin header is compatible with Raspberry Pi's GPIO pin headers.
The NanoPi NEO AIR features 512MB of 16bit wide DDR3 RAM, 8GB eMMC and one MicroSD slot. It has WiFi & Bluetooth and DVP camera interface(YUV422). The DVP camera interface can support friendlyarm's 5M-pixel camera module
It has enhanced power circuit design and better heat dissipation.
Specification
Hardware SpecCPU | Model: Allwinner H3 Number of Cores: Quad-core Frequency: 4*Cortex-A7 Up to 1.2GHz |
Memory | RAM: 512MB |
Storage | eMMC: 8GB/32GB MicroSD Slot: MicroSD*1 for external storage up to 128GB |
Connectivity | WiFi: 802.11b/g/n Bluetooth: 4.0 dual mode Antenna*1: IPX Connector |
Audio | Audio input/output Port: 2.0mm pitch 4-pin header |
Video | DVP Camera: 0.5mm pitch 24 pin FPC seat |
USB | MicroUSB*1: MicroUSB 2.0, OTG & Power In, Type A USB Host: 2.54mm pin*2 |
Pin-header | GPIO1: 2.54mm spacing 24pin,It includes UART,SPI,I2C,GPIO GPIO2: 2.54mm spacing 12pin,It includes USBx2,IR,SPDIF,I2S Serial Debug Port: 2.54mm pitch 4-pin-header Audio input/output Port: 2.0mm pitch 4-pin header |
LED | Power LED(Red)*1 STAT LED(Green)*1 |
Others | Working Temperature: -20ºC to 70ºC |
Power | DC 5V/2A |
PCB | 6 Layer |
Dimension | 40*40mm |
Weight | 7.5g(WITHOUT Pin-headers) |
OS/SoftwareOS Support | - FriendlyCore 16.04(based on UbuntuCore-16.04) - FriendlyWrt 18.06(32-bit) - Armbian - DietPi - Lakka - Kali |
Kernel version | Linux-4.14-LTS U-boot-2017.11 |
uboot | supports fastboot to update uboot |
FriendlyCore | rpi-monitor: check system status and information npi-config: system configuration utility for setting passwords, language, timezone, hostname, SSH and auto-login, and enabling/disabling i2c, spi, serial and PWM NetworkManager: manage network software utility: RPi.GPIO_NP to access GPIO pins welcome window with basic system information and status auto-login with user account "pi" with access to npi-config on first system boot file system will be automatically extended supports file system auto check and repair on system boot supports FriendlyElec's NanoHat-PCM5102A supports FriendlyElec's Matrix_-_2.8_SPI_Key_TFT supports file transfer with Bluetooth supports FriendlyElec BakeBit modules supports dynamic frequency scaling and voltage regulation |
Ubuntu OLED | supports FriendlyElec's OLED module |
Eflasher | supports flashing OS image to eMMC |
Debian for NAS Dock | supports FriendlyElec's NAS Dock pre-installed OpenMediaVault |
Company Profile
Shenzhen Foing Industrial CO., Ltd.,established in 2019,is an young and dynamic enterprise with the integration of designing,manufacturing,selling of circuit board.We are committed to bringing the magic electronic world into everyone, every school, and every institution,to build an intelligent world of scientific innovation. And we insist to keep good quality and service as always.Welcome to work hard with us and develop further.
Our Advantages
1. We will ship the order after comfirming buyer's payment.
2. We can ship to you by UPS/DHL/TNT/FedEx. Pls contact us directly and we will use your preferred ways.
3. We provide 90 days warranty after goods have been received. Our products will be 100% tested before they are shipped out.
4. Any returned must be in their original condition to qualify for a refund or replacement.
Address:
1st Floor, Unit A, Shanling Digital Building, No. 10 Chiwan 1st Road, Shenzhen, Guangdong, China
Business Type:
Manufacturer/Factory
Business Range:
Consumer Electronics, Electrical & Electronics, Industrial Equipment & Components
Management System Certification:
ISO 9001
Company Introduction:
We are a high-tech company that develop and produce electronic module such as Arduino and other module. We insist to keep a good quality and service since 2014. Welcome to work hard with us to develop further.