Basic Info.
Product Description
Product Description
Specification | DC 4.5V- 20V |
| <50uA |
| L can not be repeated/H repeat |
| 0.5-200S(adjustable) |
| 2.5S |
| 32mm*24mm |
| <100 ° cone angle |
| 23mm(Default) |
1. Automatic induction: When someone enters its induction range, enter the high level, people leave the sensor range is automatically delayed off high. Output low.
2. photosensitive control (optional): the module reserved for location, can be set to photosensitive control, strong light during the day or not induction. Photosensitive control is optional, the factory did not install photosensitive resistor. If
necessary, please buy a separate photosensitive resistor to install.
3. Two trigger modes: L is not repeatable, H is repeatable. Can be jumper selected, the default is H.
A. non-repeatable trigger mode: the induction output high, the delay time is over, the output will automatically change from high to low.
B. Repeated trigger mode: that is, after sensing the output high, in the delay time period, if the human body in its sensing range of activities, its output will remain high until the delay after the person will leave the high The level changes to low level (the sensing module automatically delays a delay time after every activity of the human body, and takes the time of the last activity as the starting point of the delay time).
4. Induction blocking time (default setting: 3-4 seconds): After each sensing output (high level goes low), the sensing module can be followed by a blocking time, during which it is sensed The device does not receive any sense signals. This function can be used to achieve the interval between the sensing output time and the blocking time. It can be applied to the interval detection products. At the same time, this function can effectively suppress all kinds of interference in the process of load switching.5. Wide operating voltage range: the default operating voltage DC5V to 20V
6. Micro-power: Quiescent current 65 microamps, especially for dry battery-powered electrical products.
7. Output high-level signal: can be easily with various types of circuits to achieve docking.
Company Profile
Shenzhen Foing Industrial CO., Ltd.,established in 2019,is an young and dynamic enterprise with the integration of designing,manufacturing,selling of circuit board.We are committed to bringing the magic electronic world into everyone, every school, and every institution,to build an intelligent world of scientific innovation. And we insist to keep good quality and service as always.Welcome to work hard with us and develop further.
Our Advantages
1. We will ship the order after comfirming buyer's payment.
2. We can ship to you by UPS/DHL/TNT/FedEx. Pls contact us directly and we will use your preferred ways.
3. We provide 90 days warranty after goods have been received. Our products will be 100% tested before they are shipped out.
4. Any returned must be in their original condition to qualify for a refund or replacement.
Address:
1st Floor, Unit A, Shanling Digital Building, No. 10 Chiwan 1st Road, Shenzhen, Guangdong, China
Business Type:
Manufacturer/Factory
Business Range:
Consumer Electronics, Electrical & Electronics, Industrial Equipment & Components
Management System Certification:
ISO 9001
Company Introduction:
We are a high-tech company that develop and produce electronic module such as Arduino and other module. We insist to keep a good quality and service since 2014. Welcome to work hard with us to develop further.
){kind=link}